Incoloy Alloy 825

  • Home
  • Incoloy Alloy 825 Buttweld & Forged Fittings Manufacturer

Quality Approved Products

Quality in a service or product is not what you put into it. It is what the client or customer gets out of it.
For Enquiry


Call Now

91-22-6749 6251
91-22-6752 1102

Incoloy Alloy 825 UNS N08825 Buttweld & Forged Fittings Manufacturer

Incoloy Alloy 825 Buttweld & Forged Fittings Manufacturer in Mumbai, India & Incoloy Alloy 825 Buttweld & Forged Fittings Exporter in Mumbai, India

Incoloy 825 - UNS N08825 Common Trade Names (Incoloy 825®, Nickelvac® 825, Nicrofer® 4221)

Incoloy 825® is a nickel-iron-chromium composite with increments of molybdenum, copper, and titanium. The nickel substance is adequate for imperviousness to chloride-particle stress-consumption splitting. Siddhgiri Tubes is a leading supplier and exporter of Incoloy 825 Buttweld & Forged Fittings. We provide Incoloy Alloy 825 Buttweld & Forged Fittings globally as per made-to-order requirements given by our highly valued clients, to meet the quality demands of our customers.

Siddhgiri Tubes exports a variety of Incoloy Alloy 825 Pipe Fittings (ASME SB-366 / ASME SB-564 / AMS 5766), Incoloy Alloy 825 Pipe Fittings Exporter in Mumbai India, Incoloy Alloy 825 Buttweld Fittings, Incoloy Alloy 825 Forged Fittings, ANSI B16.9 Incoloy Alloy 825 Buttweld & Forged Elbow, 825 Incoloy Alloy Buttweld & Forged Reducer Stockist, Incoloy Alloy UNS N08825 Pipe Fittings Exporters, Incoloy Alloy 825 Buttweld & Forged Tees Suppliers, ASME SB-366 / ASME SB-564 / AMS 5766 Incoloy 825 Long Radius Bend Pipe Fittings, 825 Incoloy Alloy Buttweld & Forged 90 deg Elbow, Incoloy DIN 2.4858 Pipe Fittings Exporter, 825 Incoloy Alloy Buttweld & Forged End Pipe Cap.

Incoloy Alloy 825 Pipe Fittings (UNS N08825 Pipe Fittings), Incoloy Alloy 825 Pipe Fittings (UNS N08825 Pipe Fittings) and Incoloy Alloy 825 Pipe Fittings (UNS N08811 Pipe Fittings) are utilized as a part of an assortment of uses including introduction to high temperatures and destructive situations. WNR 2.4858 Fittings, WNR 2.4858 Pipe Fittings and WNR 2.4858 Pipe Fittings are utilized for warmth regarding gear, for example, bushel, plate and fixtures .We offer these Incoloy 825 Buttweld & Forged Fittings products in specially crafted shapes and sizes according to the prerequisites given by our customers, and that too at a moderate and market leading costs.

The Incoloy Alloy 825 Buttweld & Forged Fittings (UNS N08825) are used the following applications :-
1. Ethylene furnace quench boilers
2. Hydrocarbon cracking
3. Valves, fittings and other components exposed to corrosive attack from 1100-1825° F
4. Industrial furnaces
5. Heat-treating equipment
6. Chemical and petrochemical processing
7. Super-heater and re-heaters in power plants
8. Pressure vessels
9. Heat exchangers


incoloy alloy 825 fittings manufacturer exporter


Chemical Composition of Incoloy Alloy 825 (UNS N08825) Buttweld & Forged Fittings

C

MN

P

S

Si

Cr

Ni

Mo

Cu

Co

Cb+Ta

Ti

Al

Fe

Other

Other

.05 max

1.0

-

.03 max

.5 max

19.5 - 23.5

38.0 - 46.0

2.5 - 3.5

1.5 - 3.0

-

-

0.6 - 1.2

0.2 max

22.0 min

-

-


Chemical Composition of Incoloy Alloy 825 (UNS N08825) Buttweld & Forged Fittings


Chemical Composition of Incoloy Alloy 825 (UNS N08811) Buttweld & Forged Fittings


Mechnaical Properties of Incoloy Alloy 825 (UNS N08825) Buttweld & Forged Fittings

Density 8.41 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi – 80,000 , MPa – 550
Yield Strength (0.2%Offset) Psi – 32,000 , MPa – 220
Elongation 30 %


Specification of Incoloy Alloy 825 (UNS N08825) Buttweld Fittings

Standards ANSI/ASME B16.9, B16.28, MSS-SP-43.
Specification ASME SB-366 / ASME SB-564 / AMS 5766
Type Seamless / Welded / Fabricated
Schedule Sch 5 TO Sch XXS.
Size ½”NB to 24″NB in Sch 10s, 40s, 80s, 160s, XXS


Specification of Incoloy Alloy 825 (UNS N08825) Forged Fittings

DImensions ANSI/ASME B16.11 & BS3799, etc.
Specification ASTM / ASME SB 564
Type Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT, Threaded Fittings
Class 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.
Size 1/8" TO 4"


Specification of Incoloy Alloy 825 (UNS N08825) Buttweld & Forged Fittings

Sheet/Plate Round Bar/Wire Pipe Tube Fittings Forgings
ASME SB-424 ASME SB-425 ASME SB-423
ASME SB-829
ASME SB-705
ASME SB-775
ASME SB-163
ASME SB-704
ASME SB-751
ASME SB-366 ASME SB-564


Siddhgiri Tubes exports ASTM B366 Incoloy Alloy 825 (UNS N08825) Buttweld & Forged Fittings to Saudi Arabia, UAE, Bahrain, China, Peru, Nigeria, Jordan, Muscat, Kuwait, Dubai, Thailand (Bangkok), Venezuela, Germany, Canada, Russia, Australia, Vietnam, Kazaksthan, Jiddah, Libya, Yemen, Algeria, Qatar, Oman, Iran, United States Of America, United Kingdom, Australia, South Africa, Mexico, Turkey, France, European Union, New Zealand, Angola, Congo, Kenya, Lebanon, Spain, Indonesia, Malaysia, Lebanon, Iraq, Iran, Egypt, Madagascar, Sri Lanka, Denmark, Poland, Italy, Brazil, Sudan, Singapore And Netherlands.